Well the outfeed table is now complete. I put a coat of sanding sealer and a couple coats of clear satin poly on it.
I am pleased with how it came out and I am glad I took the time to put a quick finsih on it. Thanks for reading along.
| Blog entry by empeg9000 | posted 220 days ago | 856 reads | 0 times favorited | 3 comments |  |
 |
| « Part 2: Putting it together | Part 3 of Table Saw Outfeed Table series | no next part |
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
3 comments so far
whitebeast88
home | projects | blog
1878 posts in 362 days
#1 posted 217 days ago
great job on the outfeed table.i’ve followed your posts and appreciate you sharing,thanks.
-- It don't have to be straight,it's just a suggestion!!!
yrob
home | projects | blog
265 posts in 1824 days
#2 posted 217 days ago
Great Job. That’s exactly what I am doing right now as well. Just moved into a new shop.
-- Yves
empeg9000
home | projects | blog
79 posts in 597 days
#3 posted 216 days ago
Thanks guys!
Have your say...