LumberJocks

Table Saw Outfeed Table #2: Putting it together

  • Advertise with us
Blog entry by empeg9000 posted 679 days ago 1691 reads 1 time favorited 3 comments Add to Favorites Watch
« Part 1: Reclaiming lumber Part 2 of Table Saw Outfeed Table series Part 3: Finishing it all up »

Here is a pick of the table frame after putting it together:

The stretchers fit into the dados in the legs

I put the lower stretcher almost on the floor because I want to put a couple cabinets in there with some drawers and shelves.

The top is being glued and screwed together out of 2 4X8 sheets of MDF

Next it’s onto putting the trim on the table and then the finish.



3 comments so far

View whitebeast88's profile

whitebeast88

3467 posts in 817 days


#1 posted 679 days ago

it’s going together nicely.thanks for keeping us posted.

-- Marty.Athens,AL

View NormG's profile

NormG

4092 posts in 1631 days


#2 posted 678 days ago

I wish I had the space to make one of these

-- Norman

View empeg9000's profile

empeg9000

84 posts in 1053 days


#3 posted 678 days ago

My shop is pretty small. Its about 16×20.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase