Cedar Cooler Box #10: The Lid

  • Advertise with us
Blog entry by edwood1975 posted 06-19-2015 10:35 PM 873 reads 1 time favorited 0 comments Add to Favorites Watch
« Part 9: Box Trim Part 10 of Cedar Cooler Box series no next part

I provided a cut list for the lid components, the frame is made from 1×3 and vertical lid slats are 1×4…… I basically pocket screwed the top of lid together and while I was building the lid frame I incorporated upward pocket holes to screw into the lid….
Then I screw the lid into the cooler using a piano hinge( continuous hinge)..
At the end of the day every cooler is a little different dimensions wise so if your cooler is bigger/smaller the pieces will be different than mine …


-- Ed

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics