Cedar Cooler Box #8: Wall Panel : Part 3

  • Advertise with us
Blog entry by edwood1975 posted 05-07-2015 12:44 PM 1147 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 7: Cooler wall part 2: Right side Part 8 of Cedar Cooler Box series Part 9: Box Trim »

So it’s time to Finnish off the last two panels … The back and the left side….

That completes the cooler part of the unit and I have to say it looks awesome the pics don’t do it justice.. These last 2 panels were constructed in the same way as the front and right side panel using the Kreg K4 to drill pocket holes and there all held together with the 1 1/4” self tapping screws…

I have to admit this design I made took a lot of screws I think if I would make another one I would come up with a method that didn’t require so much screws but in saying that it’s very sturdy ….

NEXT : I will be putting a mitred 45° boards on top of the frame for two reason to hide all the joinery visible at the
Top.. And to give it that finished lip that the cooler lid will be sitting on.. I will be using 2.5” wide cedar for this…
I just hope that it comes out the way I want

-- Ed

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics