LumberJocks

Cedar Cooler Box #6: Cooler Wall Part 1( front wall)

  • Advertise with us
Blog entry by edwood1975 posted 05-06-2015 12:06 AM 1372 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 5: Shelf Construction Part 6 of Cedar Cooler Box series Part 7: Cooler wall part 2: Right side »

When I designed this project using Sketchup I figured for this part of the project I would just construct the box and slot it inside the frame…

I decided to scrap that idea and build each wall panel and affix it to the frame as I went, for 1 simple reason I could adjust each panel as I saw fit…

Step 1. Cut all 3.5” panel to 13.5” length.. 7 pieces
Step 2: run all panels through the router table using a 45° chamfer bit to define the panel further as seen in pic below
Step 3.Cut 1 2.5” panel to 13.5” length… 1 piece
Step 4… Drill all pocket holes in order to attach the panels to each other and ultimately to the frame… See pic 1


To secure the panel even further I drilled 1” screws on the inside of the panel and screwed them to the front stretcher pieces

-- Ed



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com