Firstly in order to put a shelf for a little storage I need to place shelf supports and I used 1×4 cedar again for this part of the build.
I also decided that it would be more pleasing to the eye if I raised the shelf 3.5” off the ground as well as being a lot more functional and also avoid any unecessary ware and tear on the supports.
The 2 supports were cut to size and I placed 2 pocket holes in each end and then hid the screws by screwing them into the leg L structure.
I used 2 pieces of the 2×4 and placed them as spacers under the supports to achieve uniformed supports and
ultimately a level shelf…
NEXT IS THE SHELF…..