LumberJocks

Cookbook Stand #2: Main Body of Stand

  • Advertise with us
Blog entry by edwood1975 posted 02-08-2015 01:49 AM 799 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 1: Dimensions & Materials Part 2 of Cookbook Stand series Part 3: Cookbook Lip »

STEP 1:

So after I cut the 14” piece of pine that I needed for the main body the actual dimensions of the board now were 9.25”(width) x 14”(high)x .75”(thick), I measured halfway across the 9.25” board and 1.5” down and drilled a 5/8” hole so as that I can hang it later.

.

STEP 2:
After placing my 5/8” hole the design called for a couple of circles needed to be drawn and cut out with jigsaw and the instructions they used a mastic gun … so I drew my circles for the main handle design and the neck for the handle

One side complete

The other side completed (paddle handle cuts complete)

-- Ed



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com