Workbench #3: The Bottom Shelf

  • Advertise with us
Blog entry by edwood1975 posted 01-07-2015 02:39 AM 1009 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 2: The Frame Part 3 of Workbench series Part 4: The Top (OSB) »

I used 1/2” MDF for the bottom shelf, I had to do a little work before inserting it into the frame..

Firstly I had to cut 3×5” corners to accomodate the upright (legs)4×2 in the frame so I took my jigsaw to task on was the easiest part of this project so far..

All that was left was to secure the bottom shelf to the frame and I used 1 5/8” screws for that..I only screwed each end and the middle and I also countersunked the screws.

-- Ed

1 comment so far

View Roger's profile


19709 posts in 2222 days

#1 posted 01-07-2015 11:35 AM

Nothin better than a nice bench.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics