LumberJocks

Router Table & Unit #3: Router container box & drawer supports completed

  • Advertise with us
Blog entry by edwood1975 posted 11-02-2014 02:11 AM 1409 reads 0 times favorited 5 comments Add to Favorites Watch
« Part 2: Frame for Router Box Part 3 of Router Table & Unit series Part 4: Drawer Sliders »

So I’m starting to see the light att he end of the tunnel!!!!

I’ve completed the MDF box that’s going to contain the router !!! Also considering putting a plastic see through door on it !!

And if installed the drawer supports with MORE POCKET SCREWS lol,next I have to buy the under drawer runners and thrm its on to build the drawers .. A lot more research on the drawers and I’m not sure wether I need to build a router lift buying my opinion that’s a luxury not necessity !!!!!

-- Ed



5 comments so far

View rhybeka's profile

rhybeka

2677 posts in 2586 days


#1 posted 11-02-2014 12:57 PM

nice going Ed! Does the MDF add a lot of weight to it?

-- Beka/Becky - aspiring jill of all trades, still learning to not read the directions.

View timbertailor's profile

timbertailor

1592 posts in 889 days


#2 posted 11-02-2014 03:20 PM

Just some advice. MDF is not as stable as plywood when subjected to moisture\humidity so use it wisely.

I would not recommend it for a work surface for your table. The router box is fine since its performance is not critical.

Just keep it in mind when it comes time to do the top.

-- Brad, Texas, https://www.youtube.com/user/tonkatoytruck/feed

View edwood1975's profile

edwood1975

495 posts in 808 days


#3 posted 11-02-2014 04:48 PM



nice going Ed! Does the MDF add a lot of weight to it?

- rhybeka


It didn’t add as much as I first thought Rhybeka, I’m considering putting lockable castors on it…

-- Ed

View edwood1975's profile

edwood1975

495 posts in 808 days


#4 posted 11-02-2014 05:15 PM



Just some advice. MDF is not as stable as plywood when subjected to moisturehumidity so use it wisely.

I would not recommend it for a work surface for your table. The router box is fine since its performance is not critical.

Just keep it in mind when it comes time to do the top.

- timbertailor

I guess I’ll use plywood.. What about melamine chipboard


Just some advice. MDF is not as stable as plywood when subjected to moisturehumidity so use it wisely.

I would not recommend it for a work surface for your table. The router box is fine since its performance is not critical.

Just keep it in mind when it comes time to do the top.

- timbertailor


Just some advice. MDF is not as stable as plywood when subjected to moisturehumidity so use it wisely.

I would not recommend it for a work surface for your table. The router box is fine since its performance is not critical.

Just keep it in mind when it comes time to do the top.

- timbertailor


-- Ed

View Duckster's profile

Duckster

355 posts in 816 days


#5 posted 11-03-2014 03:45 AM

I recommend using two 3/4” plywood for your top with a good smooth top.

-- Duckster, Texas. {Any day of fishing, Beats a good day at work.} Wash your feet and love Jesus

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com