or Join Now!
I would like to thank everyone for there help and,encouragement…I just now need to sand and apply a finish I think
-- Life is enjoyable especially when you borrow from people
home | projects | blog
613 posts in 2304 days
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
#1 posted 02-08-2011 07:46 PM
Those gaps are killing me slowly
2495 posts in 2498 days
#2 posted 02-08-2011 09:26 PM
Hey dub, Wow! Look at the improvement in the fit up. I was having a similar problem and when patron was here for a visit, he checked out my saw and miter gauge. He found the pivot screw had loosened on my EB3 miter gauge and even though I had just tuned up the old Ridgid saw, it was way out of tune (like me). I installed the PALS and readjusted the trunnion and we were able to cut some good usable pieces.Your problem looks to be the same as mine. When you get everything in sync, the pieces fall together.
Maybe a miter sled for your TS in a solution. Look at the ones on Hot Projects. You have to be able to repeat the cuts without loosing your angles.The problem is not you. You have the concept down pat.Rand
#3 posted 02-08-2011 10:25 PM
You might be right I’ll check that for sure. I did another one with purpleheart and it’s worst than this one
#4 posted 02-09-2011 01:21 AM
Hey dub, did you check out steliart’s miter sled? And Britboxmaker has some good dtuff too. Martyn is a great mentor on these jig. Rand
#5 posted 02-09-2011 01:52 AM
Not yet I was trying to find tune this
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics