LumberJocks

Jewelry Cabinet

  • Advertise with us
Blog series by Devin updated 819 days ago 4 parts 8192 reads 17 comments total

Part 1: Initial SketchUp models

1187 days ago by Devin | 7 comments »

Hi all, just a quick shout out to see what you think of these sketches…looking for some feedback before I start making sawdust.The first 3 pictures are of the same design from different angles, the 4th, 5th and 6th pictures are the same general design but with slight modifications.Which designs do you like or not like?Any design suggestions? Thanks everyone, I appreciate the input. This is for my wife’s birthday, so to any of you that know her, no talking about this. ;). ...

Read this entry »


Part 2: Refined SketchUp model and main body pieces ready for clean up and glue.

1152 days ago by Devin | 5 comments »

It’s been a busy month in the shop.I finally refined my design to the point where I was happy with it. I’ve added a very gentle curve to the outside of the top piece as well as the two side pieces. For the bottom, I shortened the feet to 3/4” and shortened the lower drawer section 2 1/2” tall I’ve used sliding dovetails for all of the joinery for the main section. They will provide me peace of mind if the piece is hung on the wall. First time with slid...

Read this entry »


Part 3: First Stage Glue up complete

1125 days ago by Devin | 1 comment »

Well…that took a lot longer than I expected. You’d think by now I’d remember that milling the lumber and cutting the joinery is only about the first 25% of the job. The bulk of the effort follows as you make the final adjustments, the final shaping, fine tune the details and then actually sand all the parts, glue up and sand again (and then repair the 6 dings/dents that somehow found their way onto my finished work, thank god for wet rags and irons). And I still have to p...

Read this entry »


Part 4: Final pieces, assembly and finish.

819 days ago by Devin | 4 comments »

Well, about 330 days ago I wrote something about being finished this piece in another 4 weeks. That didn’t happen, but in my defence I did get other pieces done in that time, I just kept getting pulled away from this jewelry cabinet. The work left on this piece was not big, but very finicky and detailed, which is likely why I kept finding it hard to get traction. I made the three drawers for the bottom section before moving onto the more intricate boxes that sit on the cabinet. ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase