Rock-n H Woodshop podcast #36: Using a Cope and Stick Bit Set for Panel Doors

  • Advertise with us
Blog entry by Drew - Rock-n H Woodshop posted 01-11-2014 11:13 PM 1464 reads 0 times favorited 3 comments Add to Favorites Watch
« Part 35: QA-A More In Depth Look at the Ultimate Table Saw Cabinet Part 36 of Rock-n H Woodshop podcast series Part 37: Rock-n H Woodshop "says it all!" »

Here I show you how I use my door making set to achieve a really beautiful bead board panel door. This is a 2 part series for my latest commission project, a kitchen island that I made the end grain countertop for several months back. Hope you enjoy!!!


-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK

3 comments so far

View Bigrock's profile


292 posts in 3019 days

#1 posted 01-12-2014 12:40 AM

I hate to say this but make yourself a auxiliary fence with a hole in it at the edge for the router bit. Clamp it to your saw fence and it’s much safer. A straight 2×4 will work fine. What you did was very dangerous.

View Drew - Rock-n H Woodshop's profile

Drew - Rock-n H Woodshop

644 posts in 2747 days

#2 posted 01-12-2014 12:45 AM

Trust me bigrock I know, which is why I mentioned it in my video. I plan on making my fence very very soon but with a limited timeframe I had to get that project done and I had to make do with what I had. The excess time that I took measuring and the way that it flowed through there made it very stable to push through. I would never recommend this to anyone. I appreciate the constructive words.

-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK

View whitebeast88's profile


4128 posts in 2247 days

#3 posted 01-12-2014 04:14 AM

great video,drew as always.enjoyed the bloopers at the end also.

-- Marty.Athens,AL

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics