LumberJocks

Rock-n H Woodshop podcast #13: Jointer Fence Jig

  • Advertise with us
Blog entry by Drew - Rock-n H Woodshop posted 372 days ago 944 reads 0 times favorited 9 comments Add to Favorites Watch
« Part 12: Jigs Part 13 of Rock-n H Woodshop podcast series Part 14: Video Response - Jointer Fence Jig »

Have you ever needed to joint on your table saw? I know I have in the past and I had a fence made to do it. However, b/c of my fence upgrade I have not been able to do so, until now. In this episode, I show you how to build your own jointer fence fixture that will allow you to use your saw blade like jointer knives. If you have scraps of ply that you want to make bigger without the hassle of going to the lumber store to get a new sheet, this makes nice work of cleaning up joints on not just plywood, but all woods. Take a look at this easy to make fence. Enjoy and don’t forget to subscribe. Leave me commetns on your thoughts on how to possibly make it better for your needs. :)


-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK



9 comments so far

View Timthemailman's profile

Timthemailman

301 posts in 1372 days


#1 posted 372 days ago

Thanks again, good info.

View steliart's profile

steliart

1807 posts in 1284 days


#2 posted 372 days ago

Another cool video, thanks buddy

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - http://www.steliart.com --

View Drew - Rock-n H Woodshop's profile

Drew - Rock-n H Woodshop

633 posts in 1286 days


#3 posted 372 days ago

Thanks a lot. Trying to make them shorter yet still informative and easy to follow.

-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK

View nakedjoinery's profile

nakedjoinery

117 posts in 553 days


#4 posted 372 days ago

Ok, I have a 4 1/2” jointer and no money, and a real need for a better one. If this pans out you just saved me hundreds of dollars and made my life much easier trying to joint longer boards. Can’t wait to try this. Thanks

-- mike c

View Drew - Rock-n H Woodshop's profile

Drew - Rock-n H Woodshop

633 posts in 1286 days


#5 posted 372 days ago

Your welcome Mike! Let me know how this works for you. I would love to see it! Glad I could help!!!

-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK

View cdhilburn's profile

cdhilburn

95 posts in 1280 days


#6 posted 371 days ago

Good video!! Any chance you can show us a video jointing a board or piece of ply with a ragged edge?

View Drew - Rock-n H Woodshop's profile

Drew - Rock-n H Woodshop

633 posts in 1286 days


#7 posted 371 days ago

I just might be able to oblige. Give me a bit and you should see something soon with the use of the jointer fence jig for that purpose.

-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK

View Bill White's profile

Bill White

3340 posts in 2556 days


#8 posted 369 days ago

Well done sir. The vid was/is well made, easy to comprehend, and appropriate.
Keep ‘em comin’ ‘cause a well spoken woodworker who has a grasp of the subject is valuable to us all.
Bill

-- bill@magraphics.us

View Drew - Rock-n H Woodshop's profile

Drew - Rock-n H Woodshop

633 posts in 1286 days


#9 posted 369 days ago

Thanks a lot Bill, I appreciate your kind words. I try to be well spoken as much as possible. Sometimes I wonder if I come off as annoying but you know if I can help one person, then I have done my job. Again, thank you.

Drew

-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase