LumberJocks

Rock-n H Woodshop podcast #3: Episode 4

  • Advertise with us
Blog entry by Drew - Rock-n H Woodshop posted 445 days ago 564 reads 0 times favorited 4 comments Add to Favorites Watch
« Part 2: Episode 3 Part 3 of Rock-n H Woodshop podcast series Part 4: Episode 5 "Empty No More" »

Hey fellow Jocks,
My newest episode is up on my Youtube and Blip channels. In this episode you will finally see how the epoxy flooring goes on the floor after all the prep work we did with the buffer. I still use the liquid etch in tough to reach places, however. I will then show you how to apply the top coat and a bonus view of the new rockler paint (gallon) mixer in action for easy mixing and application of the top coat. Be sure and check it out.

Thanks again for all the views and comments so far. I promise that woodworking will be coming soon…...This shop makeover has been a long time coming.

www.youtube.com/rhwoodshop
www.blip.tv/rhwoodshop

Thanks again!!!

-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK



4 comments so far

View Timthemailman's profile

Timthemailman

301 posts in 1374 days


#1 posted 445 days ago

Thanks for the video, looking forward to the rest of your garage restoration, hopefully it will help me out with my garage shop.

View Drew - Rock-n H Woodshop's profile

Drew - Rock-n H Woodshop

633 posts in 1289 days


#2 posted 444 days ago

Thanks Tim, It is a slow process. I actually have a couple of commission projects to feature before my cabinetry builds start. I have to recoop some money for the cabinet builds….LOL. There will be plenty more to come.

-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK

View JoeinGa's profile

JoeinGa

3091 posts in 605 days


#3 posted 428 days ago

I used to work in the rental dept at HD…. I guess you figured out that Floor Maintainer has a pretty wicked “Learning curve” to using it :-)

Did you bang it into the wall when you first pulled the switch? Or was the clerk nice enough to tell you to make sure you were in the middle of the room when you first hit the switch?

Nice finish on the epoxy floor

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View Drew - Rock-n H Woodshop's profile

Drew - Rock-n H Woodshop

633 posts in 1289 days


#4 posted 428 days ago

You are correct about the learning curve. Not much instruction given on the buffer but I was thinking in my head I should be in the middle of the floor just to make sure I don’t screw it up.
Thanks for the compliments on the finished floor.

-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase