LumberJocks

dschlic1's Woodworking Reviews

  • Advertise with us
View dschlic1's:homeworkshopprojects (10)blog (7)reviews (3)forum topics (27)buddies (0)favorites (0)activity logWatch
HQRP washable Shopvac replacement filters

HQRP washable Shopvac replacement filters

07-27-2015 05:03 PM by dschlic1 | 4 comments »

I purchased four of these filters about two years ago. Most of the OEM filters would not stand up and were difficult to clean. These are excellent filters, easy to clean (wash them off with water) and extremely durable. After two years of use I have yet to have one fail. These filters are rater H12 or in the newer ratings E12. Not clean room standards but more than good enough for a shop vacuum. The only down side is that they do not come with the cover that goes on the end of the filter and ...

Read this review »


Excellent stainable filler

Excellent stainable filler

10-06-2013 12:37 PM by dschlic1 | 4 comments »

While constructing my entertainment center, I cut a mortise in the wrong position. As this mortise (slot) was cut in a location that would normally not be seen, I decided to use a stainable filler. I chose Elmer’s Carpenter’s Wood Filler Max Stainable. As you can see from the second photo, the result was quite good. I also used this product to cover some small holes made by the brad point of a forstner bit. In this case you can not see any evidence of hole or the product usage. ...

Read this review »


Harbor Freight Dial Indicator with flex mount

Harbor Freight Dial Indicator with flex mount

04-13-2013 08:28 PM by dschlic1 | 1 comment »

I purchased this dial indicator to align my table saw. I choose this unit because, rather then getting a magnetic base, this unit uses a vise grip type pliers and a flexible shaft. The flexible shaft consists of a series of tubes and round rings. Inside the tubes and rings is a steel cable. On one end of the shaft is a mounting clamp for the dial indicator, and also a screw adjustment to adjust the over all length of the shaft.On the other end is a boss that screws into the vise grip pliers a...

Read this review »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com