Work Sharp 2000 Stand #2: Making Dust
Finally had time to start cutting the parts for the stand. Here is a photo of all of the pieces cut: I used a Dremel tool to cut the disks. Rather than buy the plastics disks from Work Sharp, I made some disks from hardboard and also from MDF. My design called for grooves to be cut into the MDF for the 3/16” hardboard shelves and backs. I couldn’t find a 3/16” router bit locally, so I ended up using an 1/8” bit in the Dremel and making two passes. A big hassle to make eight grooves on each of the two side walls. I wanted to have a finger hole in the shelves, so I cut the shelf blanks twice as long, and then cut a hole in the center with the Dremel tool. My...
