LumberJocks

denverdan's Blog

  • Advertise with us
This blog is written by denverdan | 4 entries so far

Latest Entry

Delta 46-715 Lathe Hack

09-08-2017 07:26 PM by denverdan | 1 comment »

My lathe has been working great since I rebuilt the pulley system with one exception. Sometimes it’s really hard to take the chuck off of the spindle. On the original pulley there were indexing holes and a indexing plunger lock that would lock the spindle allowing the chuck to come off after use. Since my pulleys didn’t have the holes there wasn’t a way to lock the spindle. Not a huge issue, but kind of a PIA. Normally I would use a couple wrenches and eventually it would un-tighten. While I did have the original pulley half with the indexing holes there wasn’t any room left to put it on the spindle. Anyhow, I was looking thru some old table saw blades ...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com