Brandon's Blog

  • Advertise with us
This blog is written by Brandon | 1 entry so far

Latest Entry

Shaper issues #1: Making crown molding with a shaper

12-04-2007 03:42 AM by Brandon | 7 comments »

After installing my new Amana 962 Crown Molding Shaper Cutter in my new Shop Fox 2 hp shaper, I was pretty fired up about making some saw dust and beautiful crown. After trying several different hold down techniques I could not get a single piece of salvageable crown molding. I decided to give up for the day. Today I went out after calling Shop Fox and decided to give it a try again. The guy at Shop Fox was non commital in giving me solid adivise, but he did mention making a jig which could help. My crown stock is 2’’ x 3/4’’. So I made a jig with that exact space inside so the stock could slide through the opening and be fully supported the length of my s...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics