LumberJocks

degoose's Favorites

  • Advertise with us
View caocian's profile

Curved Space-Time Cutting Boards

431 days ago by caocian | 10 comments »

I should start by saying that I make these boards for friends, all of whom hang them up as kitchen wall art. They have no intention of ever using them to cut on. For a more functional board, I prefer a simpler design, incorporating an end grain surface. But for decorative boards, this process is easier and the result is satisfying. To make any of these boards, the technique is pretty much the same. First, select your stock. For me, this is usually leftovers, off cuts from larger projec...

Read this entry »


View Lenny's profile

Ribbon and Bow Box Techniques

497 days ago by Lenny | 20 comments »

Enough people have asked me how the Bow Boxes I made and posted were crafted that I figured a blog was warranted. My post is here “Bow Box”: http://lumberjocks.com/projects/68845. I have seen others make the boxes and thought you might like to see different interpretations of them. bigogre has done several. Here is one of his: “Box”: http://lumberjocks.com/projects/73998. moonls recently posted one with wonderful banding in the ribbons and bow. See it “here...

Read this entry »


View Dennis Zongker's profile (online now)

“The Window Method” Parquetry is a geometrical form of Marquetry.

1143 days ago by Dennis Zongker | 28 comments »

This Parquetry panel is an insert for a conference table. This is the companies logo, It’s an abstract design of an Eagle. The panel size is 24” wide x 54” long. This was a very fun project, it took me around 32 hours to draw, cut, glue, and stain and finish. I used the “The Window Method” because of the long straight lines and the geometrical shapes. It’s much more accurate this way. If I was to used a scroll saw it would be very hard to keep the lines straight. 1...

Read this entry »


View devann's profile

Picture frame profiles

1203 days ago by devann | 5 comments »

I was checking out some picture frames that spunwood has on the site and ask to see some profiles. My request was granted so now it’s my turn. I went out to the shop and took these pictures. Hope that this helps those of us that don’t have molding cutters see another way to do it. This one is weathered cedar and a piece of redwood cut with a cove bit on the routertable and a piece of longleaf pine with a rabbet cut making the inside of the frame. Here I used ipe with sedona ...

Read this entry »


View patron's profile

tapered leg to ball end

1329 days ago by patron | 37 comments »

here is a simple way to do the preliminarytaper to ball leg (the shaping and claws are up to you ) i start by clamping two square legs togetherand drilling both ( 1/2 for each)and turning them and drilling again.next i make a sled or cut out taper guidefrom the taper point .(leaving the end square for rail attachmentand to keep it from tilting in the tooling process)and against the fence on the bandsawcut to the previous half holeturn and do the other side.using the same jigi sand it on th...

Read this entry »


View Bob #2's profile

Useful jigs for your shop #3: small mortise hinge jig for boxes etc.

1335 days ago by Bob #2 | 10 comments »

I’ve been struggling with fitting brass hinges into softer woods that I seem to work with today against my better judgment.By the time I have the mortise cut for the hinge I find that usually a portion of the mortise has either fallen away, been crushed by my chisels, or a combination of both leaving an unsightly gash into which I have to place my hinge.I’ve been looking at this jig as outlined in ShopNotes volume #12 No. 74.From hinge jigFrom hinge jig From hinge jigFrom hinge j...

Read this entry »


View SPalm's profile

Steps Cutting Board Version 2 (Two Step)

1441 days ago by SPalm | 67 comments »

This is a second generation Steps cutting board made out of walnut, maple, and cherry. The first Steps board I made used a basic square with edge of maple and cherry to make it a block and a notch to do the stepping. I wanted to try to make a stepping board using the hex Tumbling Block design, and this is what I came up with. In order to make the hex do the stepping, I needed to notch all three sides, as can be seen in the Sketchup drawing. The cool thing here is that it steps in two di...

Read this entry »


View Stevinmarin's profile

How to make a bandsaw box

1521 days ago by Stevinmarin | 42 comments »

Wow, there are a bazillion examples of bandsaw boxes on LumberJocks. I always thought they were complicated and had a hard time finding some really basic instruction. Well, here is a video for all of us bandsaw box newbies! The neat thing about bandsaw boxes is that if you give them away as gifts, people will be amazed and wonder about your woodworking prowess. They will think you are a woodworking god! Little will they know that you are a Mere Mortal and these boxes are totally easy to cr...

Read this entry »


View SPalm's profile

Handcut Endgrain Inlay

1653 days ago by SPalm | 22 comments »

This is so stolen from Geoffrey Noden of the AdjustABench. He demo’ed this at the Wood Show and Karson blogged about it. I thought it was pretty cool, and since it is not on the market yet, I thought I would make my own. Not sure what I was doing, I made what looks like a paper cutter. The arm rides between two longer sides to keep it stable and square. It is about two feet long. The cutter bar is hinged with a bolt so that it is level when it is 3/4 of an inch above the base. This let...

Read this entry »


View BlankMan's profile

Chop Saw Dust Hood #1: Top, middle rail, and back glued in place

1707 days ago by BlankMan | 13 comments »

Well Sunday I finally got around to start building a new dust collection hood for behind my new miter saw. I had one behind my old miter saw but this new saw is wider and I had to redo the bench for it to fit thus making the old hood too small to cover the area needed. Been without one for about a year because I also picked up the Delta 12” RAS and had to redo the bench for that to fit also. So I wasn’t about to build a hood until both the RAS and miter saw were firmly mounted in ...

Read this entry »


1 2 3 next »
21 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase