LumberJocks

Foot rail for the bar......

  • Advertise with us
Blog series by degoose updated 1291 days ago 3 parts 8025 reads 27 comments total

Part 1: Bracket...

1352 days ago by degoose | 11 comments »

Had a mate want to add a foot rail… to his bar …to rest you foot on…... when standing at the bar.. I made these brackets out of New Guinea Rosewood…. just need to drill a 40mm hole to thread a 40 mm Tasmanian Oak dowel through… There are six of them … three for each side of the L-shaped bar. Made a template and then cut all of them on a bandsaw and smoothed them out on the oscillating spindle sander. As well as drilling holes I will need to roun...

Read this entry »


Part 2: Holes and profiles.

1345 days ago by degoose | 5 comments »

I set up a 40 mm Forstner bit in the drill press and using a sacrificial top and fence drilled the holes through which the 40 mm Dowel will pass.. Then a quick trip around the front edges with a 1/2 roundover bit in the router…Next time I post these brackets will be after they are installed on the bar….

Read this entry »


Part 3: Installation.

1291 days ago by degoose | 11 comments »

Finally got around to fitting the bar rail for my good mate John’s bar… After screwing the brackets onto the bar posts the length of Tasmanian Oak Dowel was threaded through the holes and smaller dowels were used to secure the rod..Here is a shot of me using a small pink rose covered hammer to drive the smaller dowels in.. And a shot of me with the hammer…As you can see still have to plug the counter bored holes…Nearly time to christen the bar rails… Hav...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase