LumberJocks

Weave pattern LL Dip and Chip

  • Advertise with us
Blog series by degoose updated 06-03-2010 12:13 PM 2 parts 8134 reads 41 comments total

Part 1: Weaving a LL

06-02-2010 11:47 PM by degoose | 12 comments »

I spent a very happy day in my workshop today….mostly I jointed, thicknessed and ripped lots of timber… Purple Heart, Silver Ash, Silky Oak…[aka Lacewood] and Tasmanian Blackwood… I used an Incra TSLS 32 to rip fine strips for accents.. More woven pattern projects in the wind. It is such a pleasure to work in the new clean workshop… I moved the 3 metre machine around to make more room to play on the 2 metre machine… and moved the mitre saw… now I hav...

Read this entry »


Part 2: Cutting and Gluing up the weave.

06-03-2010 12:13 PM by degoose | 29 comments »

Here is the cutting and dry fit of the weave pattern…I sanded the lengths on the Jet 16/32 drum sander and cut the individual piece to length using an Incra Mirtre Express..You can see the Magswitch Magnets I am using as stop blocks… one long and one short…The pieces are kept in order they are cut so that the grain orientation is maintained… this makes the illusion…Enjoy the slide show of the actual glue up…Martyn… start to finish for the glue up̷...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase