LumberJocks

Next Generation Cheese boards... #3: Cutting for the second time...

  • Advertise with us
Blog entry by degoose posted 1017 days ago 1875 reads 1 time favorited 16 comments Add to Favorites Watch
« Part 2: First glue up... Part 3 of Next Generation Cheese boards... series Part 4: The third cut is the weirdest.... »

Out of the clamps… and cut at 25 degrees… [through the centre of each chevron going down from left to right…] each other piece rotated end for end…

For those who can not picture this… there will be a video forthcoming.. by the end of the week I hope…

And now back in clamps for the day… out tomorrow and I will see if this goes to the third gen…

Stay tuned…
By the way… timbers used Queensland Maple and Purple Heart…

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...



16 comments so far

View lew's profile

lew

9989 posts in 2379 days


#1 posted 1017 days ago

Oh, I’m gonna need to get my glasses checked after this one!!

Neat Pattern!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View sras's profile

sras

3813 posts in 1753 days


#2 posted 1017 days ago

I checked out the woodturnerpro website. Looks like pretty impressive software.

I would be interested in a review after you go through this …

-- Steve - Impatience is Expensive

View amagineer's profile

amagineer

1383 posts in 1221 days


#3 posted 1017 days ago

The pattern and the Queensland Maple give it a three D effect. I will have to give this type of pattern a try when I get back in the shop.
-Don

-- Flaws are only in the eye of the artisan!

View BigTiny's profile

BigTiny

1664 posts in 1512 days


#4 posted 1017 days ago

These things are as good as pot, legal, and since they last a lifetime, much cheaper too. :)

Paul

-- The nicer the nice, the higher the price!

View ShopTinker's profile

ShopTinker

876 posts in 1392 days


#5 posted 1017 days ago

I can’t imagine what the 3rd generation might be. I a little lost at this point. It looks great right now.

-- Dan - Valparaiso, Indiana, "A smart man changes his mind, a fool never does."

View SASmith               's profile

SASmith

1565 posts in 1611 days


#6 posted 1017 days ago

Nice work.
It is surprising how much lumber each generation eats up.
Have you noticed this?

-- Scott Smith, Southern Illinois

View Joe Lyddon's profile

Joe Lyddon

7674 posts in 2676 days


#7 posted 1017 days ago

Man O Man… How about 3D Generation?!

Using wood to provide “shading” takes it into the 3D arena!

It looks like you’re literally going up & down all over the board!

SO COOL!

GREAT WORK!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View A Slice of Wood Workshop's profile

A Slice of Wood Workshop

890 posts in 1797 days


#8 posted 1017 days ago

Amazing Larry. Your designs are so creative!

-- Tim- http://www.asliceofwoodworkshop.com; Twitter-@asliceofwood; Facebook-http://www.facebook.com/asliceofwood

View SPalm's profile

SPalm

4783 posts in 2506 days


#9 posted 1017 days ago

Sweet, Larry.
That is a really cool design.

Who woulda thought?
Steve

-- -- I'm no rocket surgeon

View Karson's profile

Karson

34869 posts in 3024 days


#10 posted 1017 days ago

You need to post the cutting pictures so we can see how this was cut.

Great design

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware karson_morrison@bigfoot.com †

View Roger Clark aka Rex's profile

Roger Clark aka Rex

6940 posts in 2058 days


#11 posted 1017 days ago

Larry, who knew that cutting the cheese could be so visually pleasing as well. :-)

-- Roger-R, Republic of Texas. "Always look on the Bright Side of Life" - An eyeball to eyeball confrontation with a blind person is as complete waste of Time.

View matt garcia's profile

matt garcia

1821 posts in 2296 days


#12 posted 1017 days ago

COOL!!!

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View Betsy's profile

Betsy

2913 posts in 2520 days


#13 posted 1017 days ago

Very, very cool.

-- Like a bad penny, I keep coming back!

View lanwater's profile

lanwater

3076 posts in 1558 days


#14 posted 1017 days ago

You are the best Larry!

It’s going to look great. It’s already looking great.

Thanks for sharing.

-- Abbas, Castro Valley, CA

View TopamaxSurvivor's profile

TopamaxSurvivor

14721 posts in 2300 days


#15 posted 1017 days ago

I’m out of words to express my admiration of your talent and craftsmanship!!

-- "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase