Well the glue has had time to cure… now to take the weave out of the clamps.
A quick trip through the drum sander…
Reasonable flat… now it is off to the bandsaw… onto a circle cutting jig..
A quick pivot..
Now we have cut all the corners off… there will be less to sand so back in the Drum Sander
To show the colour and grain a little mineral spirits..
Tomorrow… a base and bearing… final sand and a few coats of poly.. Might use the Earlex 5000 and a water base finish..
-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...