Catamaran Cupboard Door Remake... #7: Final straight...

  • Advertise with us
Blog entry by degoose posted 02-17-2011 11:53 PM 1500 reads 0 times favorited 17 comments Add to Favorites Watch
« Part 6: Update...profiles. Part 7 of Catamaran Cupboard Door Remake... series no next part

Coming down the home straight with these doors.

Here is a quick shot of the set up for the slot cutting on the old router table..

Finished the rebates on the panels… back 4 mm and the front 7 mm

Using the Incra Fence and the Woodpecker Unilift made it easy to switch from one height to another …

Moved the blade on the TS to 45 degrees and positioned the fence for the bevel cuts on the front of the panels..

A Wixey Digital Ange Guide is very useful here..

A little adjustment during dry fit and off to the clamps to be glued…

Round out the corners where needed… sand to 240 grit…

Unfortunately due to time constraints I will not be applying the finish or fitting these doors.. this will be left up to the client… but I hope to be able to visit and take a few photos when they are in….

-- Don't drink and use power tools @

17 comments so far

View littlecope's profile


3071 posts in 3551 days

#1 posted 02-18-2011 12:05 AM

Those came out Great Larry!!
Pity we can’t see them with finish yet… That Rosewood is going to look incredible!!

-- Mike in Concord, NH---Unpleasant tasks are simply worthy challenges to improve skills.

View blackcherry's profile


3338 posts in 3872 days

#2 posted 02-18-2011 12:09 AM

Nice book match panel and grain flow Larry, but I don’t know how you could let those out of the shop with out a glimpse of finish. Nice looking door should add significant value to said property…take care mate…BC

View lilredweldingrod's profile


2496 posts in 3156 days

#3 posted 02-18-2011 12:16 AM

Very nice Larry! Beautiful wood.

View Lee A. Jesberger's profile

Lee A. Jesberger

6860 posts in 4029 days

#4 posted 02-18-2011 12:45 AM

You’re getting there, Larry.

Looks good.


-- by Lee A. Jesberger

View reggiek's profile


2240 posts in 3320 days

#5 posted 02-18-2011 01:11 AM

Gotta love that Incra Positioner…..those are looking good….going to be one snazzy catamaran.

-- Woodworking.....My small slice of heaven!

View Beginningwoodworker's profile


13345 posts in 3722 days

#6 posted 02-18-2011 01:12 AM

Looks good!

View Jim Bertelson's profile

Jim Bertelson

4187 posts in 3214 days

#7 posted 02-18-2011 01:31 AM

Beautimonius!! Love the wood.

........and the workmanship is, well,...........

OK, you don’t believe it, I know you don’t want the moniker, but you are Type A all the way!


-- Jim, Anchorage Alaska

View lanwater's profile


3111 posts in 2984 days

#8 posted 02-18-2011 01:36 AM

They look really nice Larry. I like the panel pattern.

-- Abbas, Castro Valley, CA

View matt garcia's profile

matt garcia

1899 posts in 3721 days

#9 posted 02-18-2011 01:38 AM

You have some beautiful lumber down under to work with, Larry!! Just look at the awesome figure on that wood!!

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View Dennisgrosen's profile


10880 posts in 3165 days

#10 posted 02-18-2011 02:05 AM

if the costummer ain´t pleased now , then I don´t want to know what will please them
but hit them with something hard from me ….twice
beautyfull stuff
thank´s for the update Larry I realy hope you get some pictures of it installed

take care

View SASmith               's profile


1850 posts in 3037 days

#11 posted 02-18-2011 02:11 AM

Nice book match on the panels.

-- Scott Smith, Southern Illinois

View moonls's profile


412 posts in 3036 days

#12 posted 02-18-2011 03:01 AM

Very nice work Larry. Does the TWC get jealous when you used other tools?!

-- Lorna, Cape Cod

View shipwright's profile


8000 posts in 2847 days

#13 posted 02-18-2011 03:52 AM

Very nice Larry. I hope this Catamaran is worthy of these. As an aside I have to say my preference in sailboats is for the ones that are more stable right side up than upside down. :-)

Nice work.

-- Paul M ..............If God wanted us to have fiberglass boats he would have given us fibreglass trees.

View donjoe's profile


1360 posts in 3080 days

#14 posted 02-18-2011 04:31 AM

I know you have been working on these for sometime, but they turned out wondeful. The wood grain stands out great on these.

-- Donnie-- listen to the wood.

View stefang's profile


15881 posts in 3384 days

#15 posted 02-18-2011 03:03 PM

Nice work Larry and beautiful wood too.

-- Mike, an American living in Norway.

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics