LumberJocks

Catamaran Cupboard Door Remake... #4: Horns on the rails and styles...

  • Advertise with us
Blog entry by degoose posted 08-24-2010 11:32 AM 1084 reads 0 times favorited 12 comments Add to Favorites Watch
« Part 3: Rails and Stiles. Part 4 of Catamaran Cupboard Door Remake... series Part 5: Mortise and tenon... »

I mentioned in an earlier post about making the styles over long.. so that when you dry fit the panel there is a little extra… called Horns… to assist in the taking the frame back apart..
Here is a quick shot of the frame with Horns…

And a few more shots of the book matched pieces that will be cut to size and then milled into the panels…

This last pic is of the rails and styles routed with the other profile not shown  in the last post…

I will be assembling the doors in the next few days and then it is off to the boatyard to check the fit… and make any adjustments prior to finish…

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...



12 comments so far

View SPalm's profile

SPalm

5138 posts in 2825 days


#1 posted 08-24-2010 01:47 PM

Sweet.
It looks like your rail and stile bit did a really clean job too. Joints look nice and tight.

Steve

-- -- I'm no rocket surgeon

View BritBoxmaker's profile

BritBoxmaker

4542 posts in 1979 days


#2 posted 08-24-2010 01:54 PM

Bet you’re glad you’re not doing louvres.

-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging. http://www.theartofboxes.com

View ellen35's profile

ellen35

2633 posts in 2375 days


#3 posted 08-24-2010 02:49 PM

Nice neat work, Larry.

-- "Don't let the perfect be the enemy of the good." Voltaire

View Lee A. Jesberger's profile

Lee A. Jesberger

6772 posts in 2923 days


#4 posted 08-24-2010 04:20 PM

You’re doing a great job Larry. No surprise there though.

Lee

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

View Eric in Florida.'s profile

Eric in Florida.

3730 posts in 2519 days


#5 posted 08-24-2010 04:48 PM

Expert level work as always Larry.
Those book matched panels are going to look exquisite.

-- Nothing is particularly hard if you divide it into small jobs ~ Henry Ford

View Cozmo35's profile

Cozmo35

2199 posts in 1979 days


#6 posted 08-24-2010 07:10 PM

Looks like a lot of work! Good luck!!

-- If you don't work, you don't eat!.....Garland, TX

View fernandoindia's profile

fernandoindia

1079 posts in 1887 days


#7 posted 08-24-2010 07:29 PM

Naiz Larry. Carry all wood up the boat, then down the boat. Uppps, forgot the hammer, up the boat again, down the boat. Uppps forgot to measure twice….. Wow, I´m tired

Thank you for the horn trick. Didn´t know that. however I am quite stingy with wood, so my horns will be 1/8 inch or less.

I´ll be awaiting a new Lazy Larry with the horn leftovers, lol

-- Back home. Fernando

View jockmike2's profile

jockmike2

10635 posts in 3190 days


#8 posted 08-24-2010 08:56 PM

Nice looking wood for the panels Larry. You make it look easy.

-- (You just have to please the man in the Mirror) Mike from Michigan -

View matt garcia's profile

matt garcia

1851 posts in 2615 days


#9 posted 08-25-2010 01:09 AM

Nice panels!! That wood is gorgeous!!

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View a1Jim's profile

a1Jim

113368 posts in 2520 days


#10 posted 08-25-2010 02:16 AM

Good progress looking good.

-- http://artisticwoodstudio.com Custom furniture

View Splinterman's profile

Splinterman

23057 posts in 2304 days


#11 posted 08-25-2010 04:24 AM

Looking good big fella.

View Napaman's profile

Napaman

5433 posts in 3020 days


#12 posted 09-01-2010 05:01 AM

wow…that is some work…

-- Matt--Proud LJ since 2007

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com