Apothecary Cabinet.. #2: I was distracted.

  • Advertise with us
Blog entry by degoose posted 08-06-2010 11:17 AM 2326 reads 0 times favorited 13 comments Add to Favorites Watch
« Part 1: Where have I been? Part 2 of Apothecary Cabinet.. series Part 3: Finished the drawers? »

I started to route the grooves in all 140 parts of the drawers for the Apothecary Cabinet….. I did manage to get 12 drawers done 48 pieces in all….. then I got distracted… or sidetracked…I did manage to finish the teasers… but will post tomorrow…

Here is a pic of the Router table… I made this a few years ago… and the stops on the fence.. This helps to make the stopped grooves..

I know this is a little difficult to see but the side pieces do not have the groove all the way through…

You can see the drawers have the face fronts cut from one board… and the grain goes across the whole 5…Times Seven…

So I was sidetracked with the teaser in the last pic in the last post…

More on that next time…

And I hope to have the other 23 drawers grooved in the next week or so…


-- Don't drink and use power tools @

13 comments so far

View Lee A. Jesberger's profile

Lee A. Jesberger

6860 posts in 4033 days

#1 posted 08-06-2010 11:41 AM

Hey Larry,

You’re off to a good start. By the time you finish though, you may be needing some of the little pills that fill these drawers.


-- by Lee A. Jesberger

View Cozmo35's profile


2200 posts in 3089 days

#2 posted 08-06-2010 01:57 PM

Daunting task for sure. Good luck!

-- If you don't work, you don't eat!.....Garland, TX

View SPalm's profile


5321 posts in 3935 days

#3 posted 08-06-2010 02:06 PM

I had a girl friend once who was a teaser….

Nice job keeping track of the drawer fronts. That will really show in the end. Until the customer mixes them all up by mistake and hires you to come out and put them back in the right place. (Maybe you should number the bottoms).


-- -- I'm no rocket surgeon

View Karson's profile


35128 posts in 4454 days

#4 posted 08-06-2010 03:00 PM

Larry A great looking job. Great design with the sequenced boards.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware soon moving to Virginia †

View Robb's profile


660 posts in 3987 days

#5 posted 08-06-2010 03:23 PM

Great attention to detail! I’d mix them up for sure.

-- Robb

View a1Jim's profile


117160 posts in 3630 days

#6 posted 08-06-2010 05:18 PM

Keep on trucking a big job with a good start m8

-- wood crafting & woodworking classes

View Rustic's profile


3253 posts in 3649 days

#7 posted 08-06-2010 05:20 PM

lookin good larry

--, Rick Kruse, Grand Rapids, MI

View Beginningwoodworker's profile


13345 posts in 3726 days

#8 posted 08-07-2010 01:44 AM

Looking good Larry.

View Flemming's profile


417 posts in 2950 days

#9 posted 08-08-2010 02:51 PM

looks good! i cant wait to see more! keep it up :)

-- Flemming. It's only a mistake if you can't fix it.

View woodsmithshop's profile


1319 posts in 3599 days

#10 posted 08-09-2010 04:20 PM

looks great Larry

-- Smitty!!!

View helluvawreck's profile


31707 posts in 2920 days

#11 posted 08-09-2010 04:32 PM

Larry, these are nice drawers and cleverly done.

-- helluvawreck aka Charles,

View helluvawreck's profile


31707 posts in 2920 days

#12 posted 08-09-2010 04:38 PM

Larry, I just went to your home page and looked at your shop, projects, and blog. You have a very nice shop and do some wonderful work. BTW I noticed in your shop you have a blue plunge router mounted onto a metal jig of some sorts. Is that a mortice jig or what?

-- helluvawreck aka Charles,

View stefang's profile


15881 posts in 3387 days

#13 posted 08-15-2010 09:20 PM

Coming along well.

-- Mike, an American living in Norway.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics