LumberJocks Woodworking Forum banner

Off Kilter..

8K views 59 replies 40 participants last post by  Dennisgrosen 
#1 ·
A Sneek Peek

I thought I would give you all a sneak peek of a new slightly off kilter design..
after several inspirational XXXX 's I came up with this…

this is the slanted weave…

 
See less See more
2
#25 ·
Tight weave...

The time has come the Walrus said… to speak of many things.. of sailing ships and sealing wax and cabbages and Kings, of why the sea is boiling hot and whether pigs have wings…

Now is the time for me to venture back into the workshop and whip up some new designs that have been flopping around in my head ever since I left for New Zealand..

I have had my holiday … spent time with my daughter and her family… met some wonderful folks… seen some magnificent scenery and come back refreshed…

Oh and drank some fantastic Beer…LOL

Stay tuned… I don't really know where I will start but I will start.. right now…
Now I know… the tight weave at a slant…Run your mouse over each pic… and see what happens… cool hey

http://w662.photobucket.com/pbwidget.swf?pbwurl=http%3A%2F%2Fw662.photobucket.com%2Falbums%2Fuu349%2Fdegoose%2F0235a0a6.pbw<a href="http://photobucket.com/slideshows" target="_blank">
 
#42 ·
In the Round

Here is another sneak peek of the slanted tight weave.. After the glue up, the board was sanded on the drum sander, cut into a circle on the bandsaw, chamfered the edges and just to give you a look at the color… I used a little turps…

Further work on this piece will include more sanding and possibly using the Torque Workcentre to route out a dish in the centre.. then I will mount it on a Lazy Susan cast aluminium bearing..
http://w662.photobucket.com/pbwidget.swf?pbwurl=http%3A%2F%2Fw662.photobucket.com%2Falbums%2Fuu349%2Fdegoose%2Fc15b6d7f.pbw
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top