LumberJocks

Torque Workcentre at work.. #24: Using the template.

  • Advertise with us
Blog entry by degoose posted 1585 days ago 3528 reads 0 times favorited 15 comments Add to Favorites Watch
« Part 23: Making a Template. Part 24 of Torque Workcentre at work.. series Part 25: How to clamp work to the table. »

In the last blog I made a template for copying Cheese Boards.
In this vid we will see how to use the template with the Torque Workcentre in overhead pin routing mode.

.

I hope you all enjoyed this as much as I did making it.


.
Just a small selection of cheese boards..
Stay tuned …..If you thought the first year was good… you ain’t seen nuttin’ yet.

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...



15 comments so far

View moshel's profile

moshel

864 posts in 2282 days


#1 posted 1584 days ago

I Dont want to spoil the fun, but why is this better/faster than just using a template bit on a router table?
As for your home made bench coockies, I found that the best material for this is neopren. Find someone that makes wet suites or waders and get some offcuts. remove the outer fabric and you are left with a material that has total grip and will not loose it when its dusty. I also use it for sanding mat. the grip is unbelievable 

-- The woods are lovely, dark and deep, but I have promises to keep...

View degoose's profile

degoose

6972 posts in 1952 days


#2 posted 1584 days ago

I will answer thus …I do not have to mark the shape on the blank… and do not have to cut close to the shape with the bandsaw first… and being able to attach the blank to the template without screwing into the blank or use double sided tape…... and not having the bit on the outside of the piece…[I removed the guard for videoing]... much safer with a guard and also I have less control of the work on the router table with a pattern cutter…especially with small shapes… This is excellent for small parts and templates… and also because I have a TWC… nuff said…

Nice to know about the neoprene… will try it…

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View patron's profile

patron

12955 posts in 1939 days


#3 posted 1584 days ago

簡體字/简体字 繁體字/繁体字
’ PING-PONG ‘集韵
簡體字/简体字
繁體字/繁体字白話/白话 集韻/
HAI !

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View degoose's profile

degoose

6972 posts in 1952 days


#4 posted 1584 days ago

Con-ichi-wa, David-San.
Domo Ora-gato.
Da-wa-mata.

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View lumberdustjohn's profile

lumberdustjohn

1246 posts in 1764 days


#5 posted 1584 days ago

You must sell quite a load of these ping pong paddles.
I see who cut out the board…......Who cut the cheese?

-- Safety first because someone needs you.

View Woodwrecker's profile

Woodwrecker

3560 posts in 2173 days


#6 posted 1584 days ago

I A ont-Da, et-it-a.
esses-cha
ord-bays
ice-nay !!!

-- Having fun...Eric

View stefang's profile (online now)

stefang

12570 posts in 1932 days


#7 posted 1584 days ago

Great video Larry. I’m sick with envy! Hey guys, I thought the Chinese are the ping pongers, not the Japanese!

-- Mike, an American living in Norway.

View patron's profile

patron

12955 posts in 1939 days


#8 posted 1584 days ago

同经历 神的同在,高举耶稣 陈峰卿牧师布道幽默深刻 – 主日11时
( this is Chinese ) ,
i don’t understand the Japanese guys either ,
or the Norwegians !
中文教学之王————朗声 !

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Karson's profile

Karson

34853 posts in 2998 days


#9 posted 1584 days ago

Great video Larry on the use of the pin router.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware karson_morrison@bigfoot.com †

View donjoe's profile

donjoe

1360 posts in 1629 days


#10 posted 1584 days ago

Great vid. Want to see more of what you can do on the TWC.

-- Donnie-- listen to the wood.

View Kent Shepherd's profile

Kent Shepherd

2697 posts in 1884 days


#11 posted 1584 days ago

Larry—-Is that your legs in the video? Be careful, all the nice ladies here might get all hot and bothered—LOL

Seriously, another nice application for the TWC.
(I just bought a video camera, so maybe soon I’ll be able to share my own)

Kent

-- She thought I hung the moon--now she just thinks I did it wrong

View dustbunny's profile

dustbunny

1149 posts in 1893 days


#12 posted 1584 days ago

Legs ?
I’m checking it out right now….

Lisa

-- Imagination rules the world. ~ Napoleon Bonaparte ~ http://quiltedwood.com

View dustbunny's profile

dustbunny

1149 posts in 1893 days


#13 posted 1584 days ago

I like hairy oaks better, sorry Larry.
Looks easy when you do it, Hope I can get to be as good as you !!

Lisa

-- Imagination rules the world. ~ Napoleon Bonaparte ~ http://quiltedwood.com

View jockmike2's profile

jockmike2

10635 posts in 2844 days


#14 posted 1583 days ago

Pretty cool LL. in any language.

-- (You just have to please the man in the Mirror) Mike from Michigan -

View cristal1290's profile

cristal1290

14 posts in 1597 days


#15 posted 1580 days ago

Nice one, I will have to try that oil that you use.

-- Oskars, http://www.krasts-r.lv

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase