Some of you will have received a PM from me regards the cost of shipping the Torque Work Centre to the US.
For those who may require this info and have not received it.
Most people on the continental US will be able to have the machine [configured similar to mine ..
2 meter by 600mm table with 900 mm outfeed on the arm.. including copy. saw and drill optional attachments, shipping and insurance,], delivered to their door for between US$3900 and US$4100 depending on actual address.
The company is negotiating for a lower shipping charge. and there may be a slight reduction in price.
If anyone has an further Enquiries please PM me.
-- Drink twice... and don't bother to cut... @ larrysworkshop.wordpress.com For lovers of all things timber...
3 comments so far
bowyer
home | projects | blog
340 posts in 1567 days
#1 posted 1397 days ago
Thank you Larry for the reserch you did for us on on the shipping costs on this way cool machine
Rick
-- If at first you don't succeed...Don't try skydiving
Lee A. Jesberger
home | projects | blog
6501 posts in 2151 days
#2 posted 1397 days ago
Hey Larry;
I just had a thought: Maybe if you had one set up in a shop, (like my shop) you would sell more of them!
Good luck getting this going. It’s a great device.
Lee
-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com
PurpLev
home | projects | blog
7764 posts in 1820 days
#3 posted 1397 days ago
Thanks Larry for the time and efforts! Lee has a good idea there, and a good location ;)
Lee – when do I get a spare key?
-- ㊍ When in doubt - There is no doubt - Go the safer route.
Have your say...