LumberJocks

A journey into the workshop. #1: A journey into the workshop #1. Starting over, getting organized.

  • Advertise with us
Blog entry by dbhost posted 09-08-2009 06:17 AM 1403 reads 0 times favorited 2 comments Add to Favorites Watch
no previous part Part 1 of A journey into the workshop. series Part 2: Benchop legs, and free mulch... Sort of. »

After spending the time, money, and effort to get the equipment I need to get moving in earnest in woodworking, I am doing so. But a little background might help you dear readers to understand where I am coming from…

I hated junior high, and high school. Passionately hated that entire experience with 3 major exceptions.

#1. The social interactions. Some of the best friends I have ever had, I made in Junior High, and High School. I try to maintain many of those friendships even today…

#2. Art class, for the same reasons I also enjoyed… #3. Shop classes, specifically Wood Shop, and Welding Shop. I was encouraged to create and express myself through those classes.

While I thoroughly enjoyed college, by the time I entered college, I was in a long term, bad domestic situation that kept me away from woodworking for many years…

Fast forward 21 years, a new marriage (I am VERY blessed this time!) to a wonderful woman that actually encourages me to express and explore these things… This also coincided with my career taking off in the direction I was working toward, with sufficient income to at least indulge woodworking with a bang for the buck point of view…

I started building up my workshop from a basic circular saw, cheap router table, sanding block, and old hand me down hack saw to what it is today in January 2008.

So now it’s time for me to get organized, in both the workshop and the blog… I am hopefully making progress with both.

In case you haven’t seen it, my workshop tour page is renewed pretty frequently. I try to keep it up to date with the changes I am making in the shop.

Today was a day of throwing away. Of chucking cut offs from old 2×4s that had bent nails driven into them. The only uses I could think of for keeping these cutoffs are as kindling, and I have plenty of that… So in the trash can they went…

Next came hooking the long hose to the Thien cyclone, and sucking up as much sawdust as I could put a hose to… I have some leftover issues but nothing serious.

Lastly, I had to un bury my planer, and table saw. (Long story, workshop garage not just used as workshop quite yet…).

Since the long hose was out, drug the planer over to the hose, hooked it up, and planed my 4×4 cedar to, well… 3.5”x3.5” +/- .001” (The gauge on the Ryobi isn’t super accurate, but this is wood after all, and not cast iron…).

I then cut all of my replacement workbench legs to length. I guess for the guys with more years experience, or even with the same years but more time out in the shop my mistakes border on the sheer stupid, but I am going at this with the motto of “safety first”... My accuracy is improving for sure, but I am still prone to mistakes, which is why I am making new legs…

As I work my way through the projects, one of my key pieces to success I fear is going to be keeping the value of what I do in the workshop relevant to what LOML wants done in and around the house, The following projects are on the TOP of my list…

#1. Finish workbench. (Progress made this weekend). #2. Finish kitty condo. (progress made this weekend.) #3. Finish Replacing bad insulation and decking the attic. (Ongoing project, just started). Workbench project is relevant due to need for outfeed support from table saw for safety sake. #4. Build plywood and 2×4 shelving in attic to make tote access easier. Again workbench relevant for outfeed support. #5. Build Thien pre separator / trash can cyclone. Safety is relevant all the time… #6. Finish table saw extension wing. Router table insert will be moving to end of wing, with miter slot to allow use of stacked feather boards. This will be critical when routing profiles for mitered frame raised panel doors that she wants in the kitchen and bathrooms. #7. Workshop cabinets with mitered frame raised panel doors. Practice and skill builder for kitchen and bathroom projects…. I am planning on using as clear as possible of Cedar for this project. Going to get lots of resawing and milling practice with this!

So while the organization continues, there also remains so much more to do…

-- My workshop blog can be found at http://daves-workshop.blogspot.com



2 comments so far

View NedB's profile

NedB

658 posts in 2253 days


#1 posted 09-08-2009 04:56 PM

Keep us posted, sounds a lot like my story, minus the domestic situation.

-- Ned - 2B1ASK1 http://nedswoodshop.blogspot.com

View dbhost's profile

dbhost

5386 posts in 1920 days


#2 posted 09-08-2009 05:48 PM

While I can’t say emphatically enough how blessed I am for having things turn out the second time around, I am NOT the sort that thinks the grass is greener on the other side, and to be blunt, I don’t wish the junk I went through on anybody…

I am actually looking forward to spending more time this evening wrapping rope around the uprights to Kitty Condo. It’s brainless work, but the entire thing is so near completion as to encourage me to keep going…

I am planning on laying out the center points for drilling the legs for my workbench tonight as well… I will wrap them up in a plastic bag and seal them to limit exposure to humidity while I work on the rails (again) to try to keep the wood from twisting…

One project I forgot to mention, fence. This is huge since most of the fencing material is in the shop. I am waiting for Stump Out to do its magic. I get behind the house in the Bayou with the truck this weekend to clear out the remainder of the downed fence, and limb debris that the city hasn’t removed in the last year since Ike…

Hopefully my roofing contractor will finally get my windstorm certification to my insurance company BEFORE the next storm hits…

-- My workshop blog can be found at http://daves-workshop.blogspot.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase