Workshop Development #64: Okay I admit it. I work SLOWLY sometimes...
After some unexpected issues over the last two weekends, I ended up with not much else done to my drywall. I did manage to get my remaining upper panel cut. If I can con LOML into helping me out tonight, I should be able to get that up into place this evening, and then start on the bottom. Once the top is finished, I need to insure the stud locations are VERY clearly marked, and then get to work on making a panel lifting jig to jam the lower pieces into place so I can get the screws started… I don’t look forward to the second lower panel. I have pipes, outlets, and access holes I need to insure are there for the main water shutoff etc… that I need to work around. Yuck...
