LumberJocks

radial saw bench #1: work in progress

  • Advertise with us
Blog entry by David Kennedy posted 914 days ago 1293 reads 4 times favorited 11 comments Add to Favorites Watch
no previous part Part 1 of radial saw bench series Part 2: radial saw bench #2 »

Radial Saw bench build

-- Dave, W.V.



11 comments so far

View SASmith               's profile

SASmith

1546 posts in 1585 days


#1 posted 914 days ago

That will be a sweet setup.
Below is how I have my dust collection set up for my RAS. I found the idea here on LJs and it works great.

-- Scott Smith, Southern Illinois

View David Kennedy's profile

David Kennedy

80 posts in 921 days


#2 posted 914 days ago

I will invetigate that. I still have the cpsms to do and drawers doors etc.

-- Dave, W.V.

View SASmith               's profile

SASmith

1546 posts in 1585 days


#3 posted 914 days ago

Here is the blog with discussion on RAS dust collection.

-- Scott Smith, Southern Illinois

View NBeener's profile

NBeener

4806 posts in 1772 days


#4 posted 914 days ago

Beautiful job !

-- -- Neil

View David Kennedy's profile

David Kennedy

80 posts in 921 days


#5 posted 913 days ago

Thanks very much

-- Dave, W.V.

View beginner1's profile

beginner1

71 posts in 1156 days


#6 posted 913 days ago

I have the same saw. You have inspired me. Thanks for sharing.

-- Gerald, Illinois

View patron's profile

patron

12956 posts in 1939 days


#7 posted 913 days ago

great work david

here is my (almost identical set-up)

http://lumberjocks.com/projects/21465

and the adaptations i made for it

http://lumberjocks.com/projects/21465

and here

http://lumberjocks.com/patron/blog/11071

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View David Kennedy's profile

David Kennedy

80 posts in 921 days


#8 posted 913 days ago

Gerald hope this helps you out. i can email sizes if you need. dwk121@gmail.com.

-- Dave, W.V.

View Beginningwoodworker's profile

Beginningwoodworker

13337 posts in 2271 days


#9 posted 913 days ago

Nice job!

-- CJIII Future cabinetmaker

View James Lango's profile

James Lango

180 posts in 2132 days


#10 posted 911 days ago

very sweet! wish i seen this before i started mine last week. Looks like you have some good ideas. I like it bro. Nice job

-- Longovette@Roadrunner.com

View David Kennedy's profile

David Kennedy

80 posts in 921 days


#11 posted 911 days ago

Thanks James. I still have drawers and doors to do. Also the left end is going to be compound slide miter saw. I also purchased kregs fence system for all sides of the blades. I will post more as I get more time to work on it, just so busy with 10hrs work and home improvement work after work for 3 customers right now. Need more hrs in a day.

-- Dave, W.V.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase