LumberJocks

Let's Build a Jewelry Box

  • Advertise with us
Blog series by Bob Simmons updated 10-14-2010 12:04 AM 5 parts 39262 reads 41 comments total

Part 1: .

09-20-2010 07:58 PM by Bob Simmons | 11 comments »

”Dreams are made possible if you try.” ...Terry Fox This episode is part of the Let's Build Series Woodworking Techniques: 1.) Cutting 45 degree miters using a flat board miter sled on the Table Saw.2.) Cutting dados on the Table Saw using a Sacrificial Fence.3.) Sneaking up on table saw cuts with the aid of shims. In this online video tutorial we continue the woodworking process of using an exotic wood in the construction of a jewelry box. The walls and base of thi...

Read this entry »


Part 2: Let's Build a Jewelry Box from Koa wood veneer...Part 3

09-24-2010 07:38 PM by Bob Simmons | 9 comments »

”Dreams are made possible if you try.” …Terry Fox This episode is part of the Let's Build Series Woodworking Tips and Techniques: 1.) Using blue adhesive tape to aid the gluing process.2.) Using Ulmia spring clamps for assembly and fitting of miter joints.3.) Cutting perfect miter joints on the table saw using the Dedicated Miter Sled. In Part 3 we are back in the woodworking shop as we continue our build of the Koa wood veneer jewelry box. We have previously fit the comp...

Read this entry »


Part 3: How do we fit and make the Lid?

09-26-2010 06:40 PM by Bob Simmons | 9 comments »

Earl Nightingale…”You become what you think about.” This woodworking online episode is part of the Let's Build Series Woodworking Tips and Techniques: 1.) Green adhesive tape is used to control the spread of the wood glue.2.) The MDF is concealed by gluing a rabbeted top onto the veneered side walls.3.) Paper shims are used against the adjustable stop block on the cross cut sled when trimming the box lid.4.) The lid is placed directly onto the existing box to ma...

Read this entry »


Part 4: Woodturning... the Koa Handle

09-30-2010 08:18 PM by Bob Simmons | 4 comments »

”I never think of the future. It comes soon enough.” Albert Einstein… Physicist…1879-1955 This woodworking online episode is part of the Let's Build Series Woodworking Tips and Techniques:1.) Using cyanoacrylate glue for a quick glue-up…along with a spray accelerator.2.) Turning wood using a spindle gouge with a fingernail grind. In this episode we continue with our wood project, a Koa wood veneer jewelry box. If you recall we started out this woodwor...

Read this entry »


Part 5: a Wedged Foxtail Tenon Joint

10-14-2010 12:04 AM by Bob Simmons | 8 comments »

“If you do not expect it, you will not find the unexpected, for it is hard to find and difficult.” ...Heraclitus 500 B.C. This woodworking online episode is part of the Let's Build Series Woodworking Tips and Techniques:1.) Creating a foxtail wedged tenon joint. We continue with Part 6 of our arts and crafts wood project, the making of a Koa wood veneered jewelry box. We begin by finding the center on the wooden box lid. To do this we use a straight edge to mark diagon...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase