LumberJocks

How to make Bandings for Wood Inlay

  • Advertise with us
Blog series by Bob Simmons updated 1367 days ago 2 parts 5496 reads 12 comments total

Part 1: 1

1368 days ago by Bob Simmons | 6 comments »

Has there ever been a time when you saw a wood banding design inlaid into a table, jewelry box, or picture frame and you asked yourself the question “How did they create the banding?” I did too. Fortunately, about two years ago I came across a video on Woodtreks and it was there that I witnessed a craftsman form Orion Woodworks that explained the process of this particular banding design. The following is my interpretation. Pictured above is the look that I’m after. N...

Read this entry »


Part 2: .

1367 days ago by Bob Simmons | 6 comments »

Once the banding segments are organized we can now focus on creating the interior design. We’ll need a few outer rippings that will sandwich the segments together and keep them in alignment. You’ll notice in the picture that the outer hardwoods are walnut and maple glued together. In this case the walnut will be on the inside with the maple on the outside. The reason for this is to create contrasting colors within the banding and also with the mahogany picture frames that will...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase