| Blog series by corydoras | updated 322 days ago | 2 parts | 8851 reads | 20 comments total |
Part 1: Shopmade oscillating spindle sander
Well, I have never blogged in my soon to be 40 yrs, so, I am stepping into new grounds here.I have a couple of project posts here on LJ of homemade tools and such.I am really into woodworking, and have been kind of since I was a kid.No serious woodworking until the past 3-4 yrs.but over the years i have made some furniture for nephews and nieses, and some for me.Kribs, rocking horses, high chairs, entertainment centers shelves and so on.Finally getting my own place and my own mancave in t...
Part 2: Shopmade oscillating spindle sander: Testing
Part 2 Today I got the top finished and routed the hole for the inserts.I chose a square hole in the top to make the production of inserts simpler. Setting up the CNC for cutting Here is a video of the cutting on my CNC (Not specially interesting, but mabye for some) Then it is time for some dry testing of the movements And finally the first test. I only had 1 drum with 180 grit paper finished, so it did not remove to much material, and I did not get the ch...
