LumberJocks Woodworking Forum banner

Project Information

This is a daybed I made for our 4th Bedroom that was needed for my grandmother-n-law to use while she stayed with us after Thanksgiving. I found the plans on the Lowes website and pretty much followed it exactly minus the trundle bed and using different posts. It is made entirely from pine and I used two coats of primer and two coats of gloss paint sanding in between coats. The only thing I wish I had more time to work on the bed because it needed to be wood puttied and sanded a few more times before paint. But it did work great from my grandmother-n-law and I got several compliments from the wife, her family and neighbors. As a result, the honey do list was created. It might not be the high quality I wanted, but I'm sure it will last a long time and hopefully m daughter can use it once she gets big enough for it. Now all I have to do is finish the trundle bed.

UPDATES

I've had several requests for where I found the plans. Here is the link: Click Here

Also, I used a standard 4×4x 8' posts that I cut in half. Then I bought caps and footers normally used for decking and just made sure they weren't covered in the sealant normally used for treated lumber.

One last thing is that you might want to keep this bed in pieces until you put in it's final location. It is very heavy just on the footboard and headboards.

PROBLEM

The lag bolts used in the design of the bed didn't hold very well. They are starting to work loose. Greg3G recommended that I might want to drill out the holes where the lag bolts are located and put hardwood dowels (like 1" dowels) in the holes and then reuse the lag bolts after drilling new holes. If you have any other suggestions please let me know.

Gallery

Comments

· Registered
Joined
·
1,329 Posts
The compliments you got were well deserved. A very nice bed indeed.
 

· Registered
Joined
·
262 Posts
Very nice. The only drawback with pleasing the family is the honey do list will keep getting bigger.
 

· Registered
Joined
·
1,429 Posts
Looks like you are checking stuff off of that Honey-Do list. The bed came out looking good. My wife and I sat down last night and began putting this year's list together. Good luck and ook forward to seeing some of the idea projects you have planned.

CtL
 

· Registered
Joined
·
863 Posts
An increased honey due list means more materials and tools! Nice work. Congratulations on some well deserved compliments!
 

· Registered
Joined
·
536 Posts
Great bed, we need two at my house, she already added that to this years list of todo's. I'll be looking for plans in the near future. Where did you get your mattress from?
 

· Registered
Joined
·
121 Posts
I would recommend the hardwood dowels but not in the exact way that Greg3G suggested. What I did on one of the beds I just posted was drill the hole for the screws like normal then drill a perpendicular hole through the side of the screw hole. Once you put the dowel in the perpendicular hole your bolt will be going into the side of the hardwood dowel. Essentially you are pulling the whole dowel against the softer pine and it holds really well.

 

· Registered
Joined
·
136 Posts
Have been looking at the Lowes plans for some time now in prep for a bed I am designing for a friend.
I like your modifications.
 

· Registered
Joined
·
19,753 Posts
Well if the connection is were I think it is kshipps approach is good except you use bolts and a nut is put in the perpendicular hole and then wood plugs or bed bolt covers.
 
Top