LumberJocks Woodworking Forum banner

Project Information

At long last, I've finished a new humidor. This one has an interesting twist.

The sides are built from solid Honduran mahogany with a 3/4-in. multi-ply top and a 1/4-in. multi-ply bottom. Rosewood veneer covers the shell. Edge banding is wenge and the inlay is holly. Hinges are of the side rail variety. As for the finish - about 12-15 (can't remember) coats of lacquer followed by a few coats of paste wax.

Now for the lining - like all humidors, this one is lined with Spanish cedar. The difference is that part of my lining is comprised of cedar I got from Cuba's Pinar del Rio province. All the liner pieces have had their end grain sealed with a few coats of shellac to limit end grain moisture absorbtion.

I'm about to start work on another model which will incorporate a lid lift cast from cast iron chunks that fellow off one of the 18th century canons lining "El Moro," the old Spanish fort that keeps watch over the entrance to the Bay of Havana. I'm getting really into the idea of incorporating found objects or objects that have great meaning into my work.

As for the performance of the humidor (anyone here building them?) I got it up to 65% humidity and then took the moistened sponge I had kept inside (to humidify it) out. It's been a couple of days so far and it's still at 65% - seems like I've got a good seal. At first I thought it didn't have enought friction when opening the lid (I feared it would lose moisture too quickly) but it seems ok for now.

Cheers!
-Ed

Gallery

Comments

· Registered
Joined
·
38 Posts
Very nice. Clean and Classy look with appealing contrasts and colors.

Are there any good websites you could recommend for info on how to build a good humidor and what one needs to watch out for? It's something I would like to build once, but only if I read up first on how to make one that actually fulfills the purpose well.
 

· Registered
Joined
·
40 Posts
Hi there,

Indeed, I would highly recommend this old article from Fine Woodworking. It's what I based my first humidors off of. I made a couple of changes to it however:
- instead of using MDF for the lid, I use high quality 3/4-in. multi-ply
- I also seal all the end grain of the spanish cedar liner pieces with shellac (careful not to coat the actual faces of the liner pieces - this helps with stability
- I also chose side rail hinges instead of quadrant hinges since they are easier to install and are super-solid - just be sure you invest in some good hinges (about $40) - it's worth it. Why spend 100 bucks building a beautiful object only to install sub-par $15 hinges? Know what I mean?
Cheers and good luck!
-Ed
 

· Registered
Joined
·
1,833 Posts
Well done, very clean lines. Where is the humidifier and guage going?
 

· Registered
Joined
·
40 Posts
I'll install a digital gauge and humidifier right on the lid - just haven't bought them yet. I've been testing the humidity levels with a big 3-inch diameter analog hygrometer I have for testing only.

Cheers!
Ed
 

· Registered
Joined
·
38 Posts
@Ed Pirnik

Thanks for the tip on the fine woodworking article. I googled it and it is actually available as a free download, which made me happy.
As far as your changes go, they seem like intelligent improvements. I only use plywood myself and never MDF for my works. Not out of snobbery about how it's a man-made material and just dust+glue , but because I put value on the fact that I build things to be repairable and anyone who has tried to veneer MDF with hide glue and then remove it again will probably agree that it's not exactly something to recommend.
About the hinges I have to fully agree. If you build high quality work that is worth something, you should not shy away from giving it hardware that is adequate as well. Sadly I have yet to find an online-store here in Europe that sells good hinges. So I've not incorporated any in my work yet. I wanted to get some hidden SOSS hinges recently, but could only find them in places that sell in bulk. Sometimes it seems not so easy to find a store even in our advanced age of information and the internet.

Next thing I'd need into would probably be humidifiers and get a hygrometer for testing as well.
 

· Registered
Joined
·
6,840 Posts
Beautiful work, Ed. 1st class in every respect!
 

· Registered
Joined
·
17 Posts
Very nice. Perfect wood combi.

Cheers

Ian
 

· Registered
Joined
·
24 Posts
Ed, Thanks for your earlier comments on my "jaws" jig. Comming from you, that is indeed a compliment! I felt I should return the favor after I saw your humidor. I used to smoke cigars years ago, but now maybe once per year is about it. That said, I must tell you I appreciate your humidor for it's simple elegance! Absolutely stunning! Incidentally, I'm told the best way to test humidity is to put in a fresh Macanudo on Monday, and see how you enjoy it on Friday.
 

· Registered
Joined
·
40 Posts
Thanks Tom - incidentally, I've got a couple of Dominicans (CT wrapper) cooking there right now. LOL

Cheers!

-E
 

· Registered
Joined
·
544 Posts
Smoooooooth, sleeeeeeeeeek, and Elegant !
Very nice for sure!
 

· Registered
Joined
·
103 Posts
That humidor is gorgeous. Wow. I love the clean edges to it. The grains are incredible, the inlay is the perfect transitional blend between the woods, and I'm now running out of awesome things to say about it. Nice work.
 

· Registered
Joined
·
4 Posts
I'm working on a large and intricate marquetry ultra high-quality humidor myself, which is taking ages but hey,.. it's a hobby right? ;)

Love yours - looks very pro (better??)

You can be proud!
 

· Registered
Joined
·
40 Posts
Thanks Frank and everyone. I truly appreciate your supportive comments!
Cheers all,
Ed
 

· Premium Member
Joined
·
11,639 Posts
It's astoundingly gorgeous. I'm embarrassed about mine now.
 

· Registered
Joined
·
1 Posts
im an avad cigar smoker myself and i must say this is probably one of the best if not the best humidor ive ever seen. congrats on the nice work.
 

· Registered
Joined
·
1,266 Posts
Your box came out fabulous , I'm in the last stages of my very own and I'm very excited on finishing. I read the same article from FWW and also sealed the end grain on the lining. Your post has me really stoked since we followed the same path on our humidors. Thanks for posting… Blkcherry
 
Top