Project Information
In my on-going quest to organize my home shop, her's my lastest project. I have several of the Stanley organizers, and was constantly pulling all of them from the shelf they were stacked on to get to the one I needed. Since that got really old, I came up with this. There are individual strips dadoed into the sides for each one to rest on. They basically become pull out drawers.
Before you ask--There is no Bubunga or Flame Maple. This is built totally from cheap scraps.
Even the 3/4" back is 2 strips of fir plywood biscuit- joined together to make a piece wide enough.
The sides and top are fir plywood with poplar for all the trim. Even the wheels and pipe handle were junk pieces I had laying around. Black Lacquer finish.
Thanks for looking
Before you ask--There is no Bubunga or Flame Maple. This is built totally from cheap scraps.
Even the 3/4" back is 2 strips of fir plywood biscuit- joined together to make a piece wide enough.
The sides and top are fir plywood with poplar for all the trim. Even the wheels and pipe handle were junk pieces I had laying around. Black Lacquer finish.
Thanks for looking