Project Information
This is a ball jig that I made for my mini lathe, next are a couple of depth gages I made from aluminum cut-offs.
And the next picture is a Home made laminate press. And last are a few tool rest, some still need a little cleaning and grinding on the welds so I don't drag across it with my finger while turning. I don't weld very well, but it's good enough to hold and not come apart. And angle plates for fast setup on the table saw.
And the next picture is a Home made laminate press. And last are a few tool rest, some still need a little cleaning and grinding on the welds so I don't drag across it with my finger while turning. I don't weld very well, but it's good enough to hold and not come apart. And angle plates for fast setup on the table saw.