Project Information
Inspired from a picture I saw in a catalog, I made this sliding Valet for my wife for Christmas. I setup the file on my CNC to carve out the trays, then cut them out, sanded to shape, and routed the bottom. As an extra feature, I decided to engrave the inside of the bottom so that it is only visible when opened.
Made from pine, The pieces are held in place with a small metal pin and some CA glue. The felt was put in the top pieces because that's classy, just like me Finished with several coats of spray poly and a too coat of paste wax.
Thanks for looking, comments welcome and questions are replies too!
Made from pine, The pieces are held in place with a small metal pin and some CA glue. The felt was put in the top pieces because that's classy, just like me Finished with several coats of spray poly and a too coat of paste wax.
Thanks for looking, comments welcome and questions are replies too!