LumberJocks Woodworking Forum banner

Project Information

I just completed my 3rd level of stained glass class. I chose to make a stained glass panel showing a female and male Wood Duck, with 110 pieces, and 12 different colors. This project is 22×13 inches, and must be displayed or hung using a wood frame.

I decided to make my own frame from white oak. I have made a lot of picture frames before, but they did not have to bear much weight. This frame needed to be sturdy because the stained glass and solder make a relatively heavy load.

My design uses a brass screw in each corner to hold the 4 sides together. Two grooves in the top use a brass screw to attach the chain for hanging.

If you are interested in my Trials & Tribulations of making both the stained glass panel and the frame to mount it in, see my woodworking web site.

Thanks!

Gallery

Comments

· Registered
Joined
·
585 Posts
Fantastic work! worth all of the T & T!

It will be very proudly displayed SOMEWHERE!
 

· Registered
Joined
·
4,714 Posts
I really like that!
Stained glass and wood are always good together and yours is no exception!
 

· Registered
Joined
·
520 Posts
Really nice work.
 
Top