Project Information
I eyeballed a lot of the dimensions from this video.
This was the second project I built.
The joints are rabbets and dados with just screws holding them in except for the bottom shelf which is not attached at all - it just rests in the groove cut in the leg. Wood is construction 2×4s for the frame, plywood and hardboard for the work surface, pine for the vise, and oak for the surround.
It's two years later and I'm not happy with it. It racks an awful lot and I'd like better storage underneath than just one open shelf. Building a work surface over a chest of drawers should solve both of these issues.
This was the second project I built.
The joints are rabbets and dados with just screws holding them in except for the bottom shelf which is not attached at all - it just rests in the groove cut in the leg. Wood is construction 2×4s for the frame, plywood and hardboard for the work surface, pine for the vise, and oak for the surround.
It's two years later and I'm not happy with it. It racks an awful lot and I'd like better storage underneath than just one open shelf. Building a work surface over a chest of drawers should solve both of these issues.