LumberJocks Woodworking Forum banner

Project Information

I had a bunch of scrap ply from some other projects that I used for this. I used plans from Ana white that the old lady sent me a link to.

I doubted the

ength of ply glued edge to edge so I had to supplement it with pocket screws. I learned a couple things about tearout when working with ply and edge banding in this project.

I bought a harbor freight lvlp gun to spray it with latex and it worked out pretty well once I got it dialed in. It would've came out a hair better if I didn't brush a coat of primer on before I broke down and bought the gun.

Not too much to this one. More for her than me but shop time is shop time. Thanks for lookin.





str

Gallery

Comments

· Registered
Joined
·
3,876 Posts
Good looking Hall Tree! Nice design and very practical. Well executed also.

Rick
 

· Registered
Joined
·
10,147 Posts
Thanks you sirs.
 
Top