LumberJocks Woodworking Forum banner

Project Information

Here are the 'Shorty' folding saw horses using the same pattern as their big brothers in the second pic. Very solid, easy to store and they are great for getting a little lift on a large project during the sanding and finishing process'. The legs are 14" long instead of the 32" on the full size. Pivot and notches all stay the same. I hope a few of you steal this idea and enjoy them as much as I do!!
thanks for looking
Jerry

Gallery

Comments

· Registered
Joined
·
4,124 Posts
Nice 2 bu fos to build it sir!
 

· Registered
Joined
·
924 Posts
cool
 

· Registered
Joined
·
15 Posts
The 2×4 is pocket holed as it has to fit flush between the legs. The 1×2 is glued & screwed to the face of the other legs. I have changed the 1×2 out for another 2×4. I would suggest this to anyone building these.
 

· Registered
Joined
·
14 Posts
I definetely want to make a couple of these. Thanks for the info. Can you tell me what angle the legs are cut at?
 

· Registered
Joined
·
26 Posts
So cute theese tiny, little ponys. but they will serve you as welle as big ones, somtimes even better. And they will serve me too. Thanks a lot for sharing!
 
Top