Project Information
The strange shapes were made by taking a laminated solid block of wood, 3&1/2" X 3&1/2" X 4", drilling two 5/16" holes on opposite sides, (These are turn around points for the bandsaw blade) and making 4 bandsaw cuts to form the finished puzzle in the last picture. I used a 1/4" blade, but it would be a little easier making the turns using either a 3/16" or 1/8" blade. There are only 7 pieces to this puzzle, but when they are all dumped out of the carcass, there is guaranteed mayhem and frustration in trying to put it all back together.
C&C Welcome
C&C Welcome