Joined
·
11,889 Posts
I had an Incra fence a long time ago. I thinkI m new to the site the reason I joined it because I saw your table saw cabinet with the incra TS I have been researching different designs because I also have the incra TS and I am at the point setting up my shop and I want to incorporate the TS with the cabinet I am trying to decide how to approach the base of the cabinet the issue is I currently have the 54 in rails but I also have a set of 84 inch rails that I want to incorporate later based on what I ve seen so far I m thinking the best approach is two separate cabinets possibly even three with separate bases one to the right of the table saw to include the table saw I have a Delta contractor saw and a second or possibly second and third cabinet to the left of the saw that will incorporate my router table and Storage and it will have its own base my concern of course is making sure that the cabinet is stable but I can take it apart later if I need to. I am interested in your thoughts what issues you might have run into and any pitfalls that you might help me to avoid thank you
- BossRoss
you may have me confused with somebody else.
The saw I used it on was an old contractor saw
sitting on a wooden box to collect the sawdust,
nothing more.