Project Information
This cutting board is made from brown maple and bloodwood. This is my design and aside from cutting the thin bloodwood strips (because I had a bad allergic reaction to bloodwood) I completed it myself.
It was done in two seperate glue-ups. The edges were curved on a bandsaw and smoothed with a spindle sander. It was sanded to 400 grit and finished with mineral oil, then a mineral oil and wax mix.
Holla!
It was done in two seperate glue-ups. The edges were curved on a bandsaw and smoothed with a spindle sander. It was sanded to 400 grit and finished with mineral oil, then a mineral oil and wax mix.
Holla!