Project Information
This is my latested woodturning project. It started with a log that was 18" by 14" and I was curious if I could mount it between centers on my lathe.
Once that was done, I then asked - now what?
I had a new hollowing tool (munro 2) and decided to give it a try…
This ended up being about 17" tall and 12" in diameter.
It is made from one piece of Magnolia locally cut here in Florida.
The finish is simply water-based poly with a laquer spray top-coat polished to 12000 grit.
This was a lot of fun to make!
Once that was done, I then asked - now what?
I had a new hollowing tool (munro 2) and decided to give it a try…
This ended up being about 17" tall and 12" in diameter.
It is made from one piece of Magnolia locally cut here in Florida.
The finish is simply water-based poly with a laquer spray top-coat polished to 12000 grit.
This was a lot of fun to make!