LumberJocks

Craft Table

  • Advertise with us
Blog series by cmckerliesr updated 1697 days ago 1 part 2023 reads 1 comment total

Part 1: Intial build of Craft Table or Workbench

1697 days ago by cmckerliesr | 1 comment »

My wife has a craft room and she just never seems to have enough room or work surface. I had a scrap piece of 3/4 MDF that was 48 inches by 37 inches. So, I went to Lowes and bought some 2 by 4s and a half sheet of particle board. Total cost minus the MDF, was about $35. I made it with a 1 inch overhang all the way around. Yes I realize that all this, the 1 inch over hang, and even the size is a little odd. But the size of the room and the MDF dictated the size, and wanting to give as much...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase