|Workshop by chadgr||posted 05-10-2012 07:30 PM||1631 reads||0 times favorited||4 comments|
click the marker to see the address
My parents allow me to use half of their double garage for my hobby that i’m very enthusiastic about, here is some detail and pictures about my small woodshop.
This is my small spray booth made from thin plywood.
The planer and table saw accessory cart.
The workbench I built a few months back made from plywood and 2,4s It has three drawers and 2 large shelves.
Miter saw and band saw station, In order to get the band saw far enough back for it not to interfere
with the mitre saws fence I made it slide back and forward about 20cm.
In this photo the band saw is forward.
And here is the Clarke 4inch belt 6inch disc sander.
At the back of the workshop is the main workbench built by my dad many years ago. On top of the work bench is a Ryobi multi speed drill press donated to me by a friend, and on the wall is all of the hand tools, and a metal working vice.
Turning to the right above the miter saw station is the clamp rack I don’t have as many clamps as i would like but the amount I have suffices for most projects.
Underneath the middle bench is a compressor and jig storage such as Matthais Wandels pantograph system.
I also have a small area dedicated for paint preparation.
I also have a small wood storage area in my parents shed, it is a shelf i built out of plywood which is fairly deep so I can store multiple boards back to front.
Thanks for view my workshop Chad Aged 14
-- Chad Griffiths Vist my Etsy Shop https://www.etsy.com/uk/shop/Everythingwood1?ref=si_shop